Generator Set Specifications
Minimum Rating 1760 ekW (2200 kVA)
Maximum Rating 1820 ekW (2275 kVA)
Frequency 50 Hz or 60 Hz
Speed 1000 rpm (50 hz) or 900 rpm (60 hz)
Emissions/Fuel Strategy EPA Tier 2, IMO II
Engine Specifications
Aspiration Turbocharged-Aftercooled
Bore 11 in / 280 mm
Stroke 11.8 in / 300 mm
Displacement 6773 in³ / 111 l
Governor Type Electronic
Fuel System EUI
Compression Ratio 50 Hz 13.1
Compression Ratio 60 Hz 13:1
Engine Model In-line 6, 4-Stroke-Cycle Diesel
Generator Set Dimensions
Length 280.3 in / 7120 mm
Width 77.2 in / 1961 mm
Height 154.9 in / 3934 mm
Weight - Estimated 18000 lb / 8165 kg

Standard Equipment

  • Air Inlet System
    • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
  • Control System
    • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
  • Cooling System
    • Engine coolant water drains
  • Exhaust System
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
  • Lube Oil System
    • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
  • General
    • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature
Contact Us
x

We're here to help

We'll do our best to get back to you as soon as possible.