C7.1 (Electronic Control System)

Power Rating
Power Range	100 - 200 ekW

Generator Set Specifications
Frequency	50 / 60
Speed	1500 rpm / 1800 rpm

Engine Specifications
Displacement	428 in³ / 7.01 l
Aspiration	Turbocharged / Aftercooled
Bore	4.13 in / 105 mm
Stroke	5.31 in / 135 mm
Emissions	IMO II, IMO III (SCR required) U.S. EPA Tier 3, EU Stage V, China II
Configuration	Inline 6, 4-Stroke Cycle Diesel
Governor	Electronic (A5 ECM)
Refill Capacity	Lube Oil System w/oil filter change: 21 L / 5.6 gal
Oil Change Interval	500 hrs
Rotation from Flywheel End	Counterclockwise
Cooling	Heat exchanger, Seperate Circuit Keel Cooled, Combined Circuit Keel Cooled, Radiator Cooled

Generator Set Dimensions and Weights - Dependent on Generator Type
Width	38.0 in / 965 mm

Mounting System
- Front and rear engine mounting brackets
Exhaust System
- Watercooled turbocharger and exhaust manifold
Fuel System
- Common Rail fuel system
- Electric fuel priming pump
General
- Self-tensioning multi-vee belt drive
- Vibration damper and guard
Lube System
- Open crankcase ventilation system
- Integral engine oil cooler
Starting System
- 12 V or 24 V starter motor
Cooling System
- Gear-driven jacket-water pump
- Corrosion resistant sea water aftercooler
- Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
- Fuel cooler

Lube System
- Transmission gear oil cooler (engine mounted)
- Left-hand and right-hand oil dipsticks
Fuel System
- SOLAS double wall high pressure fuel lines kit
General
- Glow plugs
Protection System
- Additional engine and transmission sensor packages for on or off vessel monitoring
Cooling System
- Cabin heater (calorifier) connections
- Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
- Jacket water heater
Air Inlet System
- Various 6" water cooled exhaust elbow configurations
Starting System
- Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp