C32 IMO III

Cat C32 Generator Set, IMO III emissions certified (SCR required)

Generator Set Specifications
Minimum Rating	219 ekW
Maximum Rating	940 ekW
Frequency	60hz

Engine Specifications
Rated Engine Speed	1500 rpm
Configuration	Vee-12, 4-stroke-Cycle-Diesel
Aspiration	Turbocharged-aftercooled aspiration
Bore	5.71 in / 145 mm
Stroke	6.38 in / 162 mm
Displacement	1959 in³ / 32.1 l
Governor	Electronic (A5 ECM)
Emissions	IMO III emissions certified (SCR required)
Refill Capacity	Lube Oil System w/ oil filter change: 146 L (38.5 gal)
Oil Change Interval	750 hrs
Cooling	Heat exchanger, keel or radiator cooled
Generator	SR5 - Form Wound

AIR INLET SYSTEM
- Separate circuit aftercooled (SCAC)
- Closed crankcase fumes disposal
CONTROL SYSTEM
- 24V control system
COOLING SYSTEM
- Heat exchanger or Keel Cooling
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
FUEL SYSTEM
- Primary fuel filter with water separator installed on base frame
- Duplex fuel filters with hybrid fuel lines
GENERATORS AND GENERATOR ATTACHMENTS
- IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
LUBE SYSTEM
- Oil fill, simplex filter and dipstick
MOUNTING SYSTEM
- Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
GENERAL
- Right or left hand service sides
- Customer wiring and service tool connector

ALARM AND PROTECTION
- MGCPIIIB control panel with Cat® Alarm and Protection System
- IP44 generator protection
EXHAUST SYSTEM
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
CHARGING SYSTEM
- Charging alternator
FUEL SYSTEM
- Manual or electric fuel priming pump
- Fuel cooler
LUBE SYSTEM
- Duplex oil filters
STARTING SYSTEM
- Starting motors – air, electric or redundant