C32 Tier 3 / IMO II

Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Generator Set Specifications
Minimum Rating	219 ekW
Maximum Rating	940 ekW
Frequency	60hz

Engine Specifications
Rated Engine Speed	1800 rpm
Configuration	Vee-12, 4-stroke-Cycle-Diesel
Aspiration	Turbocharged-aftercooled aspiration
Bore	5.71 in / 145 mm
Stroke	6.38 in / 162 mm
Displacement	1959 in³ / 32.1 l
Governor	Electronic (A4 ECM)
Emissions	U.S. EPA Tier 3 / IMO II emissions certified
Generator	SR5 - Form Wound
Refill Capacity	Lube Oil System w/ oil filter change: 146 L (38.5 gal)
Cooling	Heat exchanger, keel or radiator cooled
Oil Change Interval	750 hrs

AIR INLET SYSTEM
- Separate circuit aftercooled (SCAC)
CONTROL SYSTEM
- 24V control system
COOLING SYSTEM
- Heat exchanger, keel or radiator cooled
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
FUEL SYSTEM
- Duplex fuel filters with hybrid fuel lines
- Fuel transfer and priming pump
GENERATORS AND GENERATOR ATTACHMENTS
- IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
LUBE SYSTEM
- Oil fill, simplex filter and dipstick
MOUNTING SYSTEM
- Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
GENERAL
- Right or left hand service sides
- Customer wiring and service tool connector

AIR INLET SYSTEM
- Closed crankcase ventilation
ALARM AND PROTECTION
- MGCP II or MGCP IIIB control panel with Cat® alarm and protection system
- IP44 generator protection
EXHAUST SYSTEM
- Muffler
- SOLAS approved spray shielding
CHARGING SYSTEM
- Charging alternator
CONTROL SYSTEM
- EMCP 4.2 control panel
FUEL SYSTEM
- Installed primary fuel filter with water separator and manual or electric priming pump
- Fuel cooler
LUBE SYSTEM
- Duplex oil filters
STARTING SYSTEM
- Starting motors – air, electric or dual