3608 (60 Hz)

Bore
11 in / 280 mm
Stroke
11.8 in / 300 mm
Displacement
9064 in³ / 148 l

Producing reliable power from 1830 to 2660 ekW at 60 Hz, our 3608 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We've designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set is certified for low fuel consumption.

Generator Set Specifications
Maximum Rating 2660 ekW
Minimum Rating 1830 ekW
Emissions/Fuel Strategy Low Fuel Consumption
Frequency 60 Hz
Speed 720 & 900 rpm
Duty Cycle Standby, Prime, Continuous
Engine Specifications
Engine Model 3608 I-8,4-Stroke Water-Cooled Diesel
Bore 11 in / 280 mm
Stroke 11.8 in / 300 mm
Displacement 9064 in³ / 148 l
Compression Ratio 13:01
Aspiration TA
Fuel System Direct unit injection
Governor Type Generator Set Monitoring System (GMS)
Generator Set Dimensions
Length - Maximum 404 in / 10261.7 mm
Width - Maximum 99.62 in / 2530.3 mm
Height - Maximum 156.6 in / 3977.7 mm
Dry Weight - Genset (maximum) 91050 lb / 41390 kg

Standard Equipment

  • Air Inlet System
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Air inlet shutoff
    • Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
    • Breather, crankcase, top-mounted
  • Cooling System
    • Engine coolant water drains
    • Water temperature regulator
    • Jacket water thermostats
  • Exhaust System
    • Includes adapter, flexible exhaust fitting
    • 457 mm (18 in) Cat bolt pattern
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Oil filler and dipstick
    • Service side engine mounted on cylinder block inspection covers
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Centrifugal oil filters with single shutoff
    • Oil pressure regulating valve
    • Crankcase explosion relief valves
  • Mounting System
    • Engine and generator mounting
    • Damper, torsional vibration
  • Starting / Charging System
    • Air silencer
    • One motor, engine mounted at rear, on left side
    • Vane type air starter
    • Line group for single point custom connection
  • General:
    • Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
    • Paint, Caterpillar yellow

Optional Equipment

  • Air Inlet System
    • Heavy duty air cleaner
    • Air inlet adapter
    • Boost control valve
    • Air cleaner louver assembly
    • Vertical support bracket
    • Soot filter
  • Cooling System
    • Auxiliary water pump
    • Heating aids
    • Cooling system aids
    • Expansion tank
  • Exhaust System
    • Weld flange and related hardware
    • Flexible exhaust fittings
  • Fuel System
    • Fuel priming pump
    • Duplex primary fuel strainer
    • Fuel system connections
  • Generator System
    • Class F insulation
    • Anti-condensation space heaters
    • 3 Phase, six Leads, WYE
    • Winding temperature detectors
    • Busbar connections
  • Governor System
    • Battery backup/power supply
    • 2301 A load share
    • Electronic/actuators
    • Digital programmers
    • EGB actuator
    • 723 Plus
  • Lube System
    • Lube ANSI adapter (Emergency connection)
    • Oil pan drain valve
  • Mounting System
    • Spring type vibration isolators
    • Non-vertically restrained
    • Vertically restrained
    • Isolator
  • Starting / Charging System
    • Pressure reducing valve
    • Compressed air flex hose
  • General:
    • Custom paint colors
Contact Us
x

We're here to help

We'll do our best to get back to you as soon as possible.