C8.7

Specifications
Equipment

Ratings
Power Range	641 BHP / 478 bkW

Engine Specifications
Speed Range	2300 rpm
Stroke	5.3 in / 135 mm
Aspiration	TSA
Configuration	In-line 6, 4-Stroke-Cycle Diesel
Rotation from Flywheel End	Counterclockwise
Displacement	531 in³ / 8.7 l
Bore	4.6 in / 117 mm
Emissions	EPA Tier 3 Recreational & Commercial, IMO II, EU Stage IIIA (EU IW)

Dimensions & Weights
Engine Dry Weight - Approximate	2295 lb / 1041 kg
Length - Engine	47.9 in / 1218 mm
Width - Engine	38.7 in / 881 mm
Height	38.7 in / 984 mm

Standard Equipment

AIR INLET SYSTEM
- Supercharger, electronically controlled belt driven
- Air cleaner/fumes disposal (closed system)
- Turbochargers, jacket water cooled
- Aftercooler condensate drain
CONTROL SYSTEM
- Cold mode start strategy
- PWM secondary throttle
- Cold mode start strategy
- Electronic diagnostics and fault logging
- Engine and transmission monitoring (temperature, pressure)
- Electronic fuel/air ratio control
- Engine Protection Mode for extended ambient conditions
- Three types of throttle inputs (CAN, PWM, and 0-5V)
- 70-pin customer connector
COOLING SYSTEM
- Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
- Sea water aftercooled
- Jacket water pump, belt driven
- JW Heat Exchanger - Corrosion resistant shell and tube style
- Fuel cooler
- Expansion tank
- Thermostat housing (fully open temp 95 C)
- 63mm hose bead raw water inlet
- 50 mm hose bead raw water oulet
EXHAUST SYSTEM
- Water-cooled exhaust manifold & turbocharger
- 90mm ID round flanged exhaust outlet
FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel Housing, SAE No. 1 - With M10 Threads
- Flywheel, SAE 14, 149 teeth - With M12 Threads
- SAE standard rotation
FUEL SYSTEM
- High Pressure Common Rail fuel system
- High pressure fuel system pump with integral low pressure fuel transfer pump
- Primary fuel filter, remote mounted with integrated electric priming pump
- Secondary fuel filter, Rear mounted for LH and RH Service
LUBE SYSTEM
- Crankcase breather, closed crankcase ventilation
- Oil filter, cartridge style, Rear mounted for LH and RH service
- Oil cooler
- Oil pan, center sump
- Oil pump, gear driven
- Dipstick, RH service on Port, LH service on Starboard
MOUNTING SYSTEM
- Front and rear support brackets
GENERAL
- Front belt and damper guard
- Lifting eyes
- RH or LH service options
- Upper front-facing customer wiring connector and Service Tool connection
PROTECTION SYSTEM
- Electronic Engine Monitoring System provides engine de-rate strategies to protect against adverse operating conditions
PAINTS
- Engines are painted Matterhorn white with pleasure craft finish includes epoxy primer with polyurethane topcoat. Fuel lines, water lines and clamps and wiring harness will be unpainted. Standard decals and informational films will be installed. Shipped loose parts will be shipped as received from suppliers. Heat sensitive components have a textured black finish.

Optional Equipment

CONTROL SYSTEM
- Instrument Panels
INSTRUMENTATION
- Transmission Sensors
MOUNTING SYSTEM
- Vibration isolation mounting

Standard Equipment

Optional Equipment

We're here to help